The paint is interior decoration important part prone to a number of thorny issues, people do nothing, in fact, simply find the cause of the problem, the right remedy, it is not difficult to satisfactory results, the following problem that is easy to produce for paintthe proposed solution, allowing you in interior decoration handy.

The paint flaking: the surface is too smooth sake, if the original paint is bright or matte paint (plus untreated the paste coating), the new paint to stick is not strong on the surface. Or wood rot, rust or metal, and also due to the poor quality of paint flaking. Small area of paint flaking, available polished spun paper, then putty, brush on a primer, and re-painting. Shedding of large area must paint all stripped and re-brushing.

The blistering paint: First pierce the bubble, if the water out, and that moisture can penetrate the paint underneath or behind a sun drying, the water evaporates into steam, it will put the top coat of paint from a bubble. In this case, the removal of the paint starting to use a hot air gun, let wood dry naturally, then brush on the primer, and finally re-painting the entire patch surface. If the bubble in the water, it may be cracking wood, with a small amount of air, sun drying, the air expands, patent leather muster. Faced with this situation, scraped the blistering patent leather, then filled resin fill cracks, re-painted, or no filler, painted directly microporous paint scrape patent leather.

Cracks: Most of this situation to use chemical addition to the paint remover or hot air gun after removing the paint, re-painted. If the fracture is in scope, then available sanding block or wet and dry sandpaper wet, paint rubbed off broken surface sanded smooth, putty, brush on the primer, and re-painting. Paint flowing: paint a brush is too thick, flowing cause. Can take advantage of the paint is not yet dry, brush paint brush to open. If the paint has started to dry out, will have to wait until dry, paint polished smooth spun paper, brush the surface clean with a damp cloth to wipe, and then re-careful not to brush too thick on the outer layer of paint.

Mildew discoloration: This problem occurred in the wet paint surface, such as water vapor condenses on the glass and metal surfaces often produce brown-black stain. Available fungicides, according to the instruction manuals dealing moldy parts, until the mold kill the surface clean, then re-painting.

Stain for many reasons: the paint surface stains. For example: latex paint in the water to melt the material on the wall and rust paint, steel wool grazed the wall will have Xiuban. The walls of underground pipe leak stains, etc.. To prevent stains, you can brush a layer of aluminum powder primer, if you appear stains, the stains can be removed at the latex paint, primer layer containing aluminum powder brush, and re-painting.

The coatings quit: poor indoor ventilation or the temperature is too low, paint, do it slower. Then you can open all doors and windows to promote ventilation, or put a heater in the indoor temperature increase. Still can not solve the problem, it may be lacquered surfaces greasy. The available chemical in addition to re-lacquered paint remover or heated to remove the paint, thoroughly wipe the surface.